Poinsettia

General info

poinsettia 1 poinsettia 2 poinsettia 3 poinsettia 4 poinsettia 5
  • Easy DIY Christmas crafts
  • I made poinsettias with opaque soap and transparent soap.
  • These poinsettias can be used as hanging decorations.
  • Difficulty: Easy

What you will need

supplies1supplies2supplies3
  • Soap
  • Carving or Exacto knife
  • Paring knife
  • Toothpick
  • Cutting board
  • Food coloring
  • Water
  • Paint brush
  • Poinsettia Template (download here ).
    You can make this without the template, refer to the template as needed.

Soap info

Dove Shea Butter Beauty Bar

Used in tutorial

shea butter dove bar
  • Available
  • Unilever brand
  • Shea Butter and Vanilla scented
  • Length: 8.3 cm (3-1/4")
  • Width: 6 cm (2-3/8")
  • Thickness: 1.5-3 cm (5/8-(1-1/4)")
  • Weight: 106 g (3.75 oz)

Instruction video

Instructions

1. If you are going to make a small poinsettia, cut your soap in half.
step 1
2. Thinly cut off the top and the bottom of the soap to make flat surfaces.
Then cut the soap into a circle shape.
This soap is 4.5cm (1-3/4 in) in diameter.
step 2
3. Draw a small circle in the center of the soap with a toothpick.
This circle is about 1 cm (3/8 in) in diameter.
Holding your carving knife at a right angle to the top, cut the circle.
Then cut a tiny circle in the center, and cut off the soap around it.
Shape the tiny circle into a dome shape.
step 3
4. Cut off the soap around the outer circle.
step 4
5. Divide the soap between the tiny circle and the outer circle into six equal parts with a tip of the knife.
Shape each part into a tiny dome.
step 5
6. Mark four equally spaced lines around the circle, then thinly cut off the soap to create a shallow trench between the lines.
Cut a leaf shape and cut off the soap around it.
step 6
7. Repeat the previous step three times.
Cut off the soap around the four leaves to flatten the blank.
step 7
8. Carve four leaves. Each leaf is placed between two leaves that you carved in the step 6 and 7.
step 8
9. Draw veins with a tip of the knife in each leaf.
step 9
10. Draw eight leaf shapes with a tip of the knife. Each leaf is placed between two leaves that you carved in the step 6 to 9.
Flip over the soap and make the edge thin.
Cut off the excess soap to create eight leaves.
step 10
11. (Optional) Cut out the inside of the outer leaf.
step 11
12. Repeat previous step on remaining leaves.
step 12
13. Paint the petals with food coloring diluted with water.
step 13
14. Paint the leaves.
step 14