Size: 7 cm (2-3/4") x 5.2 cm (2-1/8") x 2.5 cm (1")
Weight: 80 g (5 oz)
🎞️
Instruction video
❔
Instructions
1. Cut your soap with a paring knife as shown.
2. Cut off two pieces of soap to form a rough house shape.
3. Trim the edge of your soap.
4. Make wavy line cuts all the way around the soap.
5. Remove the soap under the wavy cuts.
6. Smooth the soap.
7. Draw diagonal lines with a knife point on the front wall.
8. Draw another diagonal line series to make diagonal plaid-like pattern.
9. Cut your colored soap into a rectangular shape.
10. Trim the soap into a door shape.
11. Draw a small circle with a toothpick.
12. Carve a door knob.
13. Make small holes with a needle.
14. Cut another piece of soap to rectangular shape.
15. Cut your soap into 2 smaller rectangular shapes.
16. Make the same set of small holes on both rectangles.
17. Cut third piece of colored soap for the chimney into a square prism.
18. Trim the edge of your soap.
19. Carve a square hole at the top.
20. Make small holes all the way around the chimney.
21. Draw a rectangle shape for chimney.
22. Carve an indent for chimney.
23. Apply soap foam. Scratch the soap with pointed tool to make the foam stick harder.
24. Put the chimney.
25. Trace a door shape.
26. Cut a depression for the door.
27. Apply soap foam.
28. Stick the door.
29. Draw a rectangle on the right wall for the window.
30. Cut a hole for the window. Use scraping tool to remove soap.
31. Apply a foam.
32. Place a window. Repeat this and two previous steps for a window on the left wall.
33. Carve small holes for the sprinkles, rotating the blade.
34. Put the sprinkles.
35. Your gingerbread house is done!
