Size: 8.7 cm (3-1/2") x 5.8 cm (2-1/4") x 3 cm (1-1/8")
Weight: 130 g (5 oz)
🎞️
Instruction video
Note: Instructions on how to carve the Penguin begin from 4:40.
❔
Instructions
1. Cut out the template.
2. Cut the piece of soap in half.
3. Trace the template onto the soap.
4. Cut out the shape of the penguin.
5. Cut a flipper and remove the soap around it.
6. Trim the belly.
7. Trace the flipper onto the other side.
8. Carve the aforementioned flipper.
9. Cut inside the flipper and remove the soap. Repeat this step for second flipper.
10. Trim the edges of the flippers.
11. Trim the edges of the head and the body.
12. Shape the front to create a bill.
13. Cut the bottom of the body horizontally.
14. Remove the soap to create feet.
15. Trim the edge around the feet.
16. Carve the side of the foot.
17. Cut a line on the side of the body.
18. Trim the tail into a pointed shape.
19. Cut a curved line in the bottom.
20. Cut a straight line between the feet.
21. Shape the feet.
22. Draw a curved line in front.
23. Remove soap along the curved line.
24. Trim the belly.
25. Slice off the face.
26. Make two holes in the face to create eyes.
27. Keep the leftover soap for future use.
28. Apply orange coloring to the bill and the feet.
29. Apply black coloring to the back, the head and the flippers.
30. Let the penguin dry completely, for about an hour.
31. Slice off the soap around the eyes.
32. Place 4 mm plastic eyes into the previously carved holes. Done!
